Introduction
[Music] Hi guys, this is Dude from EZ Techs. In this tutorial, I’ll be showing you a number of ways to fix Windows 10 startup problems such as automatic repair loop, “Your PC did not start correctly” error, infinite booting, or other similar startup issues you might be experiencing with your Windows 10.
First Fix: Restart Option
The first thing to try is to restart your PC using the restart option if you encounter a blue screen error. This could be due to power failure or abrupt shutdown. Simply use the restart option to boot your PC back into Windows. If this fails or the errors persist, proceed with other solutions in the video.
Second Fix: Startup Repair Tool
Use the startup repair tool provided in Windows to fix problems that prevent Windows from loading. Access this tool by clicking on “Advanced Options” on the blue screen and selecting “Startup Repair.” Follow the on-screen instructions to diagnose and repair your Windows automatically.
Third Fix: Registry Backup Command
If the startup repair tool fails, use the registry backup command “regback” to replace your registry configuration with the last known good configuration. Access the command prompt from the Advanced Options screen, navigate to the correct drive, back up your registry, and run the “regback” command to restore the last known good configuration.
Additional Fix: System Restore
If all the above fixes fail, consider running a system restore by creating a bootable USB with Windows 10 installation files. Refer to a separate video for instructions on creating a bootable USB. Follow the steps to perform a system restore and resolve the startup problems.
That’s it for this tutorial. I hope one of these solutions was able to help you out. Don’t forget to give this video a thumbs up if you found it useful and share it with others who may benefit. Subscribe and hit the bell icon for notifications on future tech support videos. Thanks for watching!
How to Fix Automatic Repair Loop in Windows 10
Causes of Automatic Repair Loop in Windows 10
If you are a Windows 10 user, chances are you have encountered the dreaded Automatic Repair Loop at some point. This frustrating issue occurs when your computer fails to start up properly and gets stuck in a loop of attempting to repair the system. There are several possible causes for this problem, including:
1. Corrupt system files
One of the most common reasons for the Automatic Repair Loop in Windows 10 is corrupt system files. These files are essential for the proper functioning of your operating system, and if they become damaged or missing, it can lead to startup issues.
2. Hardware problems
Another possible cause of the Automatic Repair Loop is hardware problems. This could include a failing hard drive, faulty RAM, or a malfunctioning motherboard. If your computer is experiencing hardware issues, it may struggle to boot up correctly.
3. Software conflicts
In some cases, conflicts between software programs can cause the Automatic Repair Loop. This could occur if you have recently installed new software that is incompatible with your system or if multiple programs are trying to run at the same time.
How to Fix the Automatic Repair Loop in Windows 10
If you are stuck in the Automatic Repair Loop and Startup Repair couldn’t repair your PC, don’t worry – there are several steps you can take to try and resolve the issue. Here are some potential solutions:
1. Use System Restore
One of the first things you can try is to use System Restore to roll back your computer to a previous state where it was working properly. To do this, boot into the Advanced Startup Options menu and select System Restore.
2. Run CHKDSK
Another way to fix the Automatic Repair Loop is to run the CHKDSK utility to check for and repair any errors on your hard drive. To do this, boot into the Command Prompt from the Advanced Startup Options menu and type "chkdsk /f /r" to initiate the scan.
3. Disable automatic repair
If none of the above solutions work, you can try disabling the automatic repair feature altogether. To do this, boot into the Command Prompt and type the following commands:
bcdedit /set recoveryenabled No
bcdedit /set bootstatuspolicy ignoreallfailuresBy disabling automatic repair, you may be able to bypass the loop and access your desktop.
4. Perform a system reset
If all else fails, you may need to perform a full system reset to factory settings. This will erase all of your data, so be sure to back up any important files before proceeding. To do a system reset, go to Settings > Update & Security > Recovery and choose the Reset this PC option.
Conclusion
Dealing with the Automatic Repair Loop in Windows 10 can be a frustrating experience, but with the right knowledge and tools, you can often resolve the issue on your own. By following the steps outlined above, you may be able to get your computer back up and running without the need for professional help. If the problem persists, however, it may be necessary to seek assistance from a computer repair technician.
1. Use System Restore to Fix Automatic Repair Loop
If your Windows 10 is stuck in an automatic repair loop and the startup repair couldn’t repair your PC, one solution is to use System Restore. System Restore allows you to revert your computer’s system files and settings to a previous point in time when everything was working correctly. To use System Restore, you can boot your computer into Safe Mode and then access System Restore from the Advanced Startup options. Choose a restore point that was created before the issue started, and let the computer restore to that point. This may help you fix the automatic repair loop and get your Windows 10 back to normal.
2. Check Disk for Errors to Resolve Automatic Repair Loop
Another method to try and fix the automatic repair loop in Windows 10 is to check the disk for errors. This can be done using the Command Prompt in the Advanced Startup options. Boot your computer into Safe Mode, open Command Prompt, and run the command ‘chkdsk /f /r’. This will scan your disk for errors and attempt to fix them. Once the scan is complete, restart your computer and see if the automatic repair loop has been resolved. Checking the disk for errors can help resolve underlying issues that may be causing the startup repair failure.
Conclusion:
In conclusion, dealing with an automatic repair loop in Windows 10 can be frustrating, but there are several methods you can try to fix the issue. From using System Restore to checking disk errors, these solutions may help you get your PC back up and running smoothly. If the automatic repair couldn’t repair your PC, don’t worry, as there are still options available to troubleshoot and resolve the problem.
Source: Youtube Video https://www.youtube.com/watch?v=IUKHp4Q_Fls of Channel EasyTechs.