Introduction:

[Music] Hi guys, this is Jude from Easy Techs. In this quick tutorial, I’ll be showing you a number of ways to fix Bluetooth problems in Windows. Some typical signs of this problem include your Bluetooth icon not showing in the system tray or in the device manager. It could also be that you have your Bluetooth icons in place but you cannot send or receive files or even connect to other Bluetooth devices. Here, I’m assuming your laptop has some kind of Bluetooth module attached to it. Almost all laptops these days come with one. The more modern ones have it in combo with a wireless card, so the Bluetooth comes integrated with the Wi-Fi card, or they may still have it as a separate module attached to the motherboard. Of course, you can also buy a USB Bluetooth device from eBay or some local vendors for less than five dollars. In any case, here I’ll be walking you through a number of steps you can take to troubleshoot these problems and hopefully have your Bluetooth working properly again. [Music]

Checking Wireless Button or Switch:

Before you get into any settings or configurations, you first want to check that your Bluetooth has not been disabled by the wireless button or switch on your laptop. You can find this switch somewhere around your laptop with a wireless symbol on it. It could also be on one of your function keys. So check and ensure it’s turned on. As easy as this may sound, there are times when you mistakenly flip the switch or press this button and spend hours trying to figure out why your Bluetooth isn’t working. If you are not sure whether your laptop has any kind of Bluetooth device, you can simply check your system specifications online and see if Bluetooth is listed among the connectivity options.

Checking System Settings:

Next, you want to check that your Bluetooth is not turned off from the system settings. To do that, go to your Start and click on the gear icon to open your Windows settings. On this page, click on devices. On the page that follows, you should have your Bluetooth and other devices listed. If you have your Bluetooth turned off, simply click on the switch below to turn it on. Now, as soon as it comes on, you should have your Bluetooth icon appear in the system tray, and from here, you can right-click on it to reveal the different operations you can perform with your Bluetooth.

Adding Bluetooth Device to Device Manager:

If that doesn’t work for you, then you want to manually add your Bluetooth device to the device manager. To do that, simply open your device manager, click on the Action menu, and select “Add legacy hardware.” You should have this Add Hardware wizard pop up. Here, click on next. On this page, select “Install the hardware that I manually select from a list,” then hit next. On the page that follows, search for network adapters and click on it, then hit next. Here, click on Microsoft, then select Bluetooth device from the right pane and hit next. Hit next again and wait for your Bluetooth device to be installed. Now, this could take a while so you might have to wait a bit. After the installation, click on finish, and then you should have your Bluetooth device listed under your network adapters. Here, you can also choose to update the latest available driver by simply right-clicking and selecting update driver, then search automatically for updated driver software.

Checking BIOS Settings:

If you still can’t see your Bluetooth, the next fix would be to check that your Bluetooth has not been disabled from the BIOS settings. To do that, you need to restart your computer. Then, upon restarting, use the Escape key or the required function key or combination of keys to enter your BIOS, depending on your system model. From the BIOS, try to find your I/O port access. Here, mine is under the security tab. Yours might be in the Advanced tab and could have some other name like miscellaneous devices. Here, you need to ensure that the status of your Bluetooth device is enabled. Otherwise, you can use the arrow keys and the enter key to set it to enable.

Downloading and Installing Bluetooth Driver:

If at this point you still don’t see your Bluetooth, you might need to manually download and install the Bluetooth driver that corresponds with your system specifications. For this ThinkPad, I will go to Google and search drivers for Lenovo ThinkPad T530 and open the link from PC Support Lenovo. Here, when you scroll down, you will find where it says Bluetooth and modem. Click to expand the options, then click again to show the drivers. Of course, this will differ depending on your laptop brand and how the support page is organized, but it should be pretty much similar to this. Here, I have two downloadable files, the first is the actual driver software, and the second is the readme file. Also, it shows that this driver is for Windows 10 32-bit or 64-bit. For some manufacturers like HP, you may need to select your operating system and platform, whether that’s 32-bit or 64-bit. Here, simply click on the download arrow to download and after downloading, run by double-clicking, and then follow the instructions to complete the process.

Enabling Bluetooth from Task Manager:

The next suggestion is to check that your Bluetooth has not been disabled from the Task Manager. To check that, go to your search and type Task Manager, then select Task Manager from the search results. On the Task Manager page, click on the Services tab. Then, go down to this button pane and click on Open Services. On this Services page, you can click on the Name tab to arrange them alphabetically, then search for Bluetooth support services and double-click to open the properties dialog box. On the general tab, you will see where it says startup type, and if you click on this box next to it, you should see a list of possible options for the startup type. Here, you have automatic, delayed start, automatic, manual, and disabled. Here, you can set it to manual if you don’t always need your Bluetooth to be on. That way you are able to save up on some energy, but also you will need to manually turn it on each time from the system settings. But then, if you need it constantly turned on, especially if you are adding your laptop to a Bluetooth network, then you can set it to automatic so that it comes on each time during startup. Remember to apply and hit OK after making any changes.

Enabling Bluetooth Network Connection:

If you are having some problems connecting your laptop to a Bluetooth network and you have your Bluetooth icon showing in the system tray and device manager, then chances are that your Bluetooth network connection might have been disabled from the network connections. To fix that, go to your system settings, click on network and internet. Here, click on Wi-Fi, then on this right pane click on change adapter options. Here, you will see Bluetooth connections listed among the network connections. Now check that it’s not disabled. Although my Bluetooth network connection is disabled, I still have the Bluetooth icon in the system tray, and when I right-click, I still get all the options. However, if I was trying to add this laptop to a Bluetooth Network, say a network of printers or scanners, then it won’t be able to connect. So here, I will right-click and select enable to get it back on.

Conclusion:

All of this was able to help you out. Leave us a post in the comments if you have any questions or feedback. Drop us a like if you found this video useful and share with anyone you think might want to see. Don’t forget to subscribe and hit the bell icon for notifications on future tech support videos like this one. Thanks for watching, I’ll see you in the next one.

How to Troubleshoot Bluetooth Connectivity Issues in Windows 10

What Causes Bluetooth Problems in Windows 10?

Bluetooth connectivity issues in Windows 10 can occur due to various reasons. Some of the common causes include outdated or incompatible drivers, radio frequency interference, faulty hardware, software conflicts, or incorrect settings.

Check Bluetooth Settings

The first step to troubleshoot Bluetooth problems in Windows 10 is to check the Bluetooth settings. Make sure Bluetooth is turned on by going to Settings > Devices > Bluetooth & other devices. Ensure that the toggle switch is set to on.

Update Drivers

Outdated or incompatible drivers can cause Bluetooth connectivity issues. To update Bluetooth drivers in Windows 10, go to Device Manager, expand the Bluetooth category, right-click on the Bluetooth device, and select Update Driver.

Disable Airplane Mode

If Airplane Mode is enabled on your Windows 10 device, it can disable Bluetooth connectivity. To disable Airplane Mode, go to Settings > Network & Internet > Airplane Mode, and toggle the switch to off.

Restart Bluetooth Service

Sometimes restarting the Bluetooth service can resolve connectivity issues. Press Windows + R, type services.msc, press Enter, find the Bluetooth Support Service, right-click, and select Restart.

Troubleshoot Hardware

If you are facing Bluetooth problems with a specific device, make sure the device is charged, turned on, and within range of your PC. Also, try connecting the device to another computer to rule out hardware issues.

Run Windows Troubleshooter

Windows 10 has a built-in Bluetooth troubleshooter that can automatically detect and fix common connectivity issues. Go to Settings > Update & Security > Troubleshoot, and select Bluetooth.

Check for Interference

Radio frequency interference can disrupt Bluetooth signals. Make sure there are no other electronic devices nearby that could be causing interference, such as microwaves or cordless phones.

Reset Bluetooth

If all else fails, you can reset the Bluetooth settings on your Windows 10 device. Go to Settings > Devices > Bluetooth & other devices, scroll down, and click on Remove all devices. Then, restart your computer and pair your devices again.

Contact Support

If you have tried everything and still cannot resolve the Bluetooth connectivity issues in Windows 10, it may be time to contact Microsoft Support or the manufacturer of your device for further assistance.

By following these troubleshooting steps, you should be able to fix Bluetooth problems in Windows 10 and enjoy seamless connectivity with your devices.

1. Troubleshooting Bluetooth Connectivity Issues

If you’re experiencing Bluetooth connectivity problems in Windows 10, start by checking if the Bluetooth feature is turned on. To do this, go to Settings, then Devices, and Bluetooth & other devices. Make sure the toggle switch for Bluetooth is on. If it’s already on, try disabling and re-enabling it to see if that resolves the issue. If not, you can also try updating your Bluetooth drivers. To do this, go to Device Manager, find the Bluetooth section, right-click on your Bluetooth device, and select Update driver.

2. Resetting Bluetooth Settings

If updating your Bluetooth drivers doesn’t fix the problem, you can try resetting your Bluetooth settings. To do this, go to Settings, then Devices, and Bluetooth & other devices. Under Related settings, click on More Bluetooth options. In the Bluetooth settings window, click on the Hardware tab, select your Bluetooth device, and click Properties. From there, go to the Services tab and uncheck all boxes, then click Apply. After that, recheck the boxes and click Apply again. This will reset your Bluetooth settings and may resolve any connectivity issues you’re experiencing.

Conclusion

In this article, we discussed how to troubleshoot and fix Bluetooth connectivity problems in Windows 10. By following these steps, you should be able to resolve any issues you’re experiencing with your Bluetooth device. Remember to check if Bluetooth is turned on, update your drivers, and reset your Bluetooth settings if necessary. If the problem persists, consider seeking further assistance or contacting customer support for help.

Source: Youtube Video https://www.youtube.com/watch?v=tp4VVAOKfd8 of Channel EasyTechs.

Introduction:

Hi guys, this is Do It from Easy Tech’s. In this tutorial, I’ll be showing you three possible ways to fix the problem of automatic repair loop, infinite booting, or some other startup problems you might be experiencing with Windows 10.

Method 1: Windows Safe Mode

If you have recently installed a new application to your computer and are experiencing startup issues, you can try booting into Windows Safe Mode. Here’s how you can do it:
1. Restart your computer three times when it gets to the spinning cycle screen.
2. Upon seeing the diagnosing or preparing automatic repair message, select Advanced Options.
3. Choose Startup Settings and restart, then select Safe Mode.
4. Uninstall or modify any recently installed applications causing the issue.

Method 2: Registry Backup (Regback)

If the first method didn’t work, you can try using the Registry Backup command called Regback to restore your registry configuration to a previous working state. Here’s how:
1. Access Command Prompt in Advanced Options.
2. Backup your current registry configuration.
3. Check the directories and validate the backup numbers.
4. Run the Regback command to replace the registry configuration.

Method 3: Startup Repair Tool

If the previous methods fail, you can use the Startup Repair Tool to fix problems preventing Windows from loading. Here’s how:
1. Access Startup Repair in Advanced Options.
2. Select the user account and let the tool diagnose and attempt repairs.
3. If successful, you should be able to log back into your computer.

If all three methods fail, consider running a system restore using a bootable USB with Windows 10 installation files.

And that’s it for this tutorial. Hopefully, one of these methods was able to help you resolve your Windows 10 startup issues. Give this video a thumbs up if you found it useful, share it with others, and don’t forget to subscribe for future tech support videos. Thanks for watching!

How to Troubleshoot Windows 10/11 Start-Up Issues

Understanding Common Start-Up Problems

When you encounter issues with the start-up process on your Windows 10/11 PC, it can be frustrating and worrisome. Some of the most common problems include the Automatic Repair Loop, Infinite Boot, and Blackscreen. These issues can prevent you from accessing your system and using your computer effectively.

Automatic Repair Loop

The Automatic Repair Loop is a common problem in Windows 10/11 where the system continuously attempts to diagnose and repair startup issues but fails to boot into the operating system. This can be caused by corrupted system files, hardware issues, or software conflicts.

To resolve the Automatic Repair Loop, you can try booting into Safe Mode, running a System File Checker (SFC) scan, or performing a System Restore to a previous point in time when your system was functioning properly.

Infinite Boot

An Infinite Boot loop occurs when your computer continuously restarts after the Windows logo appears during startup. This can be caused by a faulty hardware component, corrupted system files, or incompatible drivers.

To fix the Infinite Boot issue, you can try booting into Safe Mode and uninstalling any recent updates or drivers that may be causing the problem. You can also try performing a Startup Repair or using the Windows Recovery Environment to troubleshoot and repair system files.

Blackscreen

A Blackscreen error is when your computer boots up, but the display remains black, preventing you from accessing your desktop. This issue can be caused by a graphics card problem, a faulty display driver, or a Windows update that didn’t install correctly.

To troubleshoot a Blackscreen problem, you can try connecting your computer to an external monitor to see if the display appears there. You can also try booting into Safe Mode and updating or rolling back your graphics driver to resolve the issue.

Advanced Troubleshooting Steps

If the basic troubleshooting steps do not resolve your Windows 10/11 start-up problems, you may need to perform more advanced troubleshooting. This can include running a System File Checker scan, performing a DISM (Deployment Image Servicing and Management) scan, or reinstalling Windows from a bootable USB drive.

It’s also important to keep your system updated with the latest Windows updates and drivers to prevent start-up issues from occurring in the future. Regularly backing up your important files and creating system restore points can also help you recover from start-up problems more easily.

By following these troubleshooting steps and keeping your system up to date, you can effectively troubleshoot and fix start-up problems on your Windows 10/11 PC. If you continue to experience issues, consider seeking help from a professional IT technician who can diagnose and repair more complex hardware or software problems.

How to fix Windows 10/11 Start-Up problems

If your Windows 10/11 device is stuck in an automatic repair loop, the first step is to try restarting your computer by pressing and holding the power button until it shuts off. Then, turn it back on and see if the issue is resolved. If not, you can try booting into safe mode by pressing F8 or Shift + F8 during startup, and then selecting “Safe Mode” from the menu.

Dealing with Infinite Boot and Blackscreen issues

If you are experiencing an infinite boot loop, you can try using the “Startup Repair” tool by accessing the advanced startup options. If you are facing a black screen, it could be due to a graphics driver issue. Try booting into safe mode and updating or rolling back your graphics driver to see if it resolves the problem.

Conclusion

In conclusion, Windows 10/11 Start-Up problems such as automatic repair loop, infinite boot, and blackscreen can be frustrating, but with some troubleshooting steps, you can resolve them. By following the tips mentioned above, you can effectively troubleshoot and fix these common start-up issues on your Windows device.

Source: Youtube Video https://www.youtube.com/watch?v=kjOVFIEAxSQ of Channel EasyTechs.

Introduction

[Music] Hi guys, this is Dude from EZ Techs. In this tutorial, I’ll be showing you a number of ways to fix Windows 10 startup problems such as automatic repair loop, “Your PC did not start correctly” error, infinite booting, or other similar startup issues you might be experiencing with your Windows 10.

First Fix: Restart Option

The first thing to try is to restart your PC using the restart option if you encounter a blue screen error. This could be due to power failure or abrupt shutdown. Simply use the restart option to boot your PC back into Windows. If this fails or the errors persist, proceed with other solutions in the video.

Second Fix: Startup Repair Tool

Use the startup repair tool provided in Windows to fix problems that prevent Windows from loading. Access this tool by clicking on “Advanced Options” on the blue screen and selecting “Startup Repair.” Follow the on-screen instructions to diagnose and repair your Windows automatically.

Third Fix: Registry Backup Command

If the startup repair tool fails, use the registry backup command “regback” to replace your registry configuration with the last known good configuration. Access the command prompt from the Advanced Options screen, navigate to the correct drive, back up your registry, and run the “regback” command to restore the last known good configuration.

Additional Fix: System Restore

If all the above fixes fail, consider running a system restore by creating a bootable USB with Windows 10 installation files. Refer to a separate video for instructions on creating a bootable USB. Follow the steps to perform a system restore and resolve the startup problems.

That’s it for this tutorial. I hope one of these solutions was able to help you out. Don’t forget to give this video a thumbs up if you found it useful and share it with others who may benefit. Subscribe and hit the bell icon for notifications on future tech support videos. Thanks for watching!

How to Fix Automatic Repair Loop in Windows 10

Causes of Automatic Repair Loop in Windows 10

If you are a Windows 10 user, chances are you have encountered the dreaded Automatic Repair Loop at some point. This frustrating issue occurs when your computer fails to start up properly and gets stuck in a loop of attempting to repair the system. There are several possible causes for this problem, including:

1. Corrupt system files

One of the most common reasons for the Automatic Repair Loop in Windows 10 is corrupt system files. These files are essential for the proper functioning of your operating system, and if they become damaged or missing, it can lead to startup issues.

2. Hardware problems

Another possible cause of the Automatic Repair Loop is hardware problems. This could include a failing hard drive, faulty RAM, or a malfunctioning motherboard. If your computer is experiencing hardware issues, it may struggle to boot up correctly.

3. Software conflicts

In some cases, conflicts between software programs can cause the Automatic Repair Loop. This could occur if you have recently installed new software that is incompatible with your system or if multiple programs are trying to run at the same time.

How to Fix the Automatic Repair Loop in Windows 10

If you are stuck in the Automatic Repair Loop and Startup Repair couldn’t repair your PC, don’t worry – there are several steps you can take to try and resolve the issue. Here are some potential solutions:

1. Use System Restore

One of the first things you can try is to use System Restore to roll back your computer to a previous state where it was working properly. To do this, boot into the Advanced Startup Options menu and select System Restore.

2. Run CHKDSK

Another way to fix the Automatic Repair Loop is to run the CHKDSK utility to check for and repair any errors on your hard drive. To do this, boot into the Command Prompt from the Advanced Startup Options menu and type "chkdsk /f /r" to initiate the scan.

3. Disable automatic repair

If none of the above solutions work, you can try disabling the automatic repair feature altogether. To do this, boot into the Command Prompt and type the following commands:

bcdedit /set recoveryenabled No
bcdedit /set bootstatuspolicy ignoreallfailures

By disabling automatic repair, you may be able to bypass the loop and access your desktop.

4. Perform a system reset

If all else fails, you may need to perform a full system reset to factory settings. This will erase all of your data, so be sure to back up any important files before proceeding. To do a system reset, go to Settings > Update & Security > Recovery and choose the Reset this PC option.

Conclusion

Dealing with the Automatic Repair Loop in Windows 10 can be a frustrating experience, but with the right knowledge and tools, you can often resolve the issue on your own. By following the steps outlined above, you may be able to get your computer back up and running without the need for professional help. If the problem persists, however, it may be necessary to seek assistance from a computer repair technician.

1. Use System Restore to Fix Automatic Repair Loop

If your Windows 10 is stuck in an automatic repair loop and the startup repair couldn’t repair your PC, one solution is to use System Restore. System Restore allows you to revert your computer’s system files and settings to a previous point in time when everything was working correctly. To use System Restore, you can boot your computer into Safe Mode and then access System Restore from the Advanced Startup options. Choose a restore point that was created before the issue started, and let the computer restore to that point. This may help you fix the automatic repair loop and get your Windows 10 back to normal.

2. Check Disk for Errors to Resolve Automatic Repair Loop

Another method to try and fix the automatic repair loop in Windows 10 is to check the disk for errors. This can be done using the Command Prompt in the Advanced Startup options. Boot your computer into Safe Mode, open Command Prompt, and run the command ‘chkdsk /f /r’. This will scan your disk for errors and attempt to fix them. Once the scan is complete, restart your computer and see if the automatic repair loop has been resolved. Checking the disk for errors can help resolve underlying issues that may be causing the startup repair failure.

Conclusion:

In conclusion, dealing with an automatic repair loop in Windows 10 can be frustrating, but there are several methods you can try to fix the issue. From using System Restore to checking disk errors, these solutions may help you get your PC back up and running smoothly. If the automatic repair couldn’t repair your PC, don’t worry, as there are still options available to troubleshoot and resolve the problem.

Source: Youtube Video https://www.youtube.com/watch?v=IUKHp4Q_Fls of Channel EasyTechs.

Hi guys, this is Jude from Easytex. In this tutorial, I’ll be demonstrating a number of ways to fix the problem of 100% disk usage in Windows. This problem has recently become more common among Windows 10 users. Some typical signs of this problem include an obvious slowdown in the overall performance of your Windows activities like booting to desktop, mouse movements, opening of apps, and windows begin to lag significantly, and sometimes they could become unresponsive entirely.

As you can see from this laptop, after the normal boot process, it is taking much longer for the tray icons and other taskbar icons to show up. The second and even more obvious sign of this problem is that when you open your task manager, click on more details, and under the process tab, you should notice your disk utilization percentage nearing or consistently on 100%. This is accompanied by the bar being in red.

Even if yours is not stuck on 100%, but shows anything above 95% consistently for five to ten minutes after you boot up, then something is definitely not as it should be. The normal percentage should be nearly zero or less than 10 with low disk demanding processes or nothing really running. It could be a bit more but not close to 100.

The third and less common sign of this problem is an unusually loud noise from the cooling fan. There are several possible reasons why you may be having this problem ranging from hardware to software issues, settings, and processes. In any case, the solutions in this video could help you resolve this problem.

Now, without further ado let’s jump right into it.

### 1. Disabling Windows Search Service
The Windows search service could be overwhelming your disk read/write capacity. To disable it, go to Task Manager, click on the Services tab, open Services, find Windows Search, right-click on it, select Properties, set the Startup Type to Disabled, and restart your computer.

### 2. Checking Disk Defragmentation Configuration
Stop and disable scheduled defragmentation from Task Scheduler. Go to Task Scheduler, find Scheduled Defrag, click on End and then Disable to stop the process from resuming.

### 3. Updating Device Drivers
Run a regular Windows update to ensure all important drivers are installed. If not, update them manually for optimal performance.

### 4. Disabling Superfetch Service
Superfetch could be taking up a substantial amount of the read/write capacity of your disk. To disable it, open Command Prompt as administrator and enter the command “net.exe stop superfetch”.

### 5. Resetting Virtual Memory
Reset virtual memory to the recommended size to improve performance. Go to Control Panel, click on System, then Advanced System Settings, under Performance, click on Settings, go to the Advanced tab, and change the virtual memory settings accordingly.

### 6. Checking AHCI PCIe Configuration
Check your AHCI PCIe configuration, especially if you are using an SSD. Ensure you are not using the inbox AHCI driver called storeahci.sys.

### 7. Disabling Automatic Windows Update
In case the Windows Update service is causing the issue, you can try disabling automatic Windows updates to see if that resolves the problem.

If none of these suggestions work, consider backing up your files and reinstalling Windows. Drop us a feedback in the comments section if any of these solutions worked for you or if you have other working solutions to share. Give this video a thumbs up if you found it helpful and don’t forget to subscribe for future tech support videos. Thank you for watching!

How to Resolve 100% Disk Usage in Windows 10

Understanding the Issue of 100% Disk Usage in Windows 10

Windows 10 is a popular and widely used operating system, but many users have reported experiencing the issue of 100% disk usage, which can slow down the performance of their system. This problem occurs when your hard drive is constantly being used at full capacity, even when you are not running any intensive programs. This can lead to slow system performance, freezes, and even crashes. However, there are several steps you can take to fix this issue and improve the overall performance of your Windows 10 system.

Checking Task Manager to Identify the Culprit

The first step in resolving the issue of 100% disk usage is to identify the program or process that is causing it. To do this, open Task Manager by pressing Ctrl+Shift+Esc on your keyboard. Once Task Manager is open, click on the "Processes" tab and then click on the "Disk" column to sort the processes by disk usage. Look for any programs or processes that are using a high percentage of your disk and make a note of them.

Disabling Superfetch and Windows Search Services

One common culprit of 100% disk usage in Windows 10 is the Superfetch service, which is designed to help improve system performance by preloading commonly used programs into memory. However, this can sometimes cause high disk usage. To disable Superfetch, press Win+R on your keyboard to open the Run dialog box, type "services.msc" and press Enter. In the Services window, scroll down to find the Superfetch service, right-click on it, and select "Properties." In the Properties window, click on the "Stop" button to stop the service, and then set the "Startup type" to "Disabled."

Another service that can cause high disk usage is the Windows Search service. To disable this service, open the Services window as described above, find the Windows Search service, and follow the same steps to stop the service and set the startup type to "Disabled."

Updating Device Drivers

Outdated or faulty device drivers can also contribute to the issue of 100% disk usage in Windows 10. To update your device drivers, press Win+X on your keyboard to open the Power User menu, and then select "Device Manager." In the Device Manager window, expand the categories to find the devices with driver issues (they will have a yellow exclamation mark next to them). Right-click on the device and select "Update driver" to automatically search for and install the latest driver updates.

Running Disk Cleanup and Disk Defragmentation

Over time, your hard drive can become cluttered with temporary files and fragmented data, which can contribute to high disk usage. To clean up your hard drive, type "Disk Cleanup" in the Windows search bar and select the Disk Cleanup app. Check the boxes for the files you want to clean up, such as temporary files and system files, and click "OK" to start the cleanup process.

In addition to Disk Cleanup, it is also recommended to run disk defragmentation to consolidate fragmented data on your hard drive. To do this, type "Defragment and Optimize Drives" in the Windows search bar, select your hard drive, and click "Optimize" to start the defragmentation process.

Conclusion

By following these steps and implementing the suggested solutions, you can effectively resolve the issue of 100% disk usage in Windows 10 and improve the overall performance of your system. Remember to regularly check for updates, clean up your hard drive, and optimize your system to prevent similar issues in the future.

1. Disable Windows Search Service

One common culprit behind 100% disk usage in Windows 10 is the Windows Search service. To fix this issue, you can try disabling this service. To do this, press the Windows key + R, type “services.msc” and press Enter. In the Services window, scroll down to find Windows Search, right-click on it and select Properties. Then, change the startup type to Disabled and click on Stop to stop the service. Finally, click Apply and OK to save the changes. This should help reduce the disk usage on your system.

2. Disable Superfetch Service

Another service that can cause high disk usage in Windows 10 is Superfetch. To disable this service, press the Windows key + R, type “services.msc” and press Enter. Locate the Superfetch service, right-click on it, and select Properties. Change the startup type to Disabled and click on Stop. Click Apply and OK to save the changes. Disabling Superfetch can help alleviate disk usage and improve overall system performance.

Conclusion

In conclusion, high disk usage in Windows 10 can be a frustrating problem, but there are several steps you can take to fix it. By disabling services like Windows Search and Superfetch, you can reduce disk usage and improve the performance of your system. Remember to regularly check your disk usage and take appropriate action to keep your system running smoothly.

Source: Youtube Video https://www.youtube.com/watch?v=Enh3gPc3HVs of Channel EasyTechs.

Introduction:
Hi guys, this is Do It from Ascetics. In this tutorial, I’ll be showing you three possible ways to fix the "error: no such partition" error in Windows or Ubuntu during startup. This error message may appear in rescue mode grub rescue, and the primary reason for this error is a corrupted or misconfigured grub bootloader configuration.

Method 1: Locating the Partition with Your Operating System:
To begin, type the command LS on the screen with the error message to display all partitions on your disk. Check which partition has the operating system installed by using commands like LS [HD0, ms-dos1] or LS [HD0, ms-dos2]. If you find the partition with your operating system, continue with the instructions. Otherwise, follow the steps to confirm that the partition with your Ubuntu has been deleted.

Method 2: Using Bootrec Tool:
You can use the bootrec tool with a Windows 10 installation USB to locate and add Windows installations back to the boot list. Follow the steps to repair the MBR, fix boot, and scan for Windows installations on all disks. Add the identified Windows installation back to the boot list using bootrec /rebuildBCD command.

Method 3: Using the Regback Command:
The regback command replaces your registry configuration with the last known good configuration. Backup your current registry, navigate to the right drive, and run the regback command to restore the registry configuration.

Conclusion:
I hope one of these methods was able to help you fix the error. If you found this tutorial useful, give it a thumbs up, share it with others, and subscribe for more tech support videos. Thank you for watching, and I’ll see you in the next one!

Troubleshooting Grub Error: No Such Partition

Understanding Grub Rescue Mode

Upon encountering the error message "Grub Error: No Such Partition. Entering Rescue Mode. Grub Rescue," many users find themselves at a loss for what to do next. This error typically indicates that the Grub bootloader cannot locate the specified partition to boot the operating system. While this may seem like a daunting issue, there are steps you can take to troubleshoot and resolve the error.

Check for Correct Partition

The first step in resolving the Grub error is to ensure that the partition specified in the error message is correct. Oftentimes, this error occurs when the partition has been deleted, moved, or corrupted. You can use the Grub command line to check for the correct partition and make any necessary adjustments.

Repair Grub Configuration

If the correct partition is still intact, the next step is to repair the Grub configuration. You can do this by booting into a live CD or USB and reinstalling the Grub bootloader. This will update the configuration and fix any issues that may be causing the error message.

Check for Disk Errors

Another common cause of the Grub error is disk errors. Running a disk check utility, such as fsck, can help identify and repair any errors on the disk. This can prevent future issues with booting and ensure that the operating system can be accessed successfully.

Reinstall Operating System

If all else fails, you may need to consider reinstalling the operating system. This will create a fresh installation of the OS, including the Grub bootloader, and can resolve any underlying issues that may be causing the error message.

Seek Professional Help

If you are still unable to resolve the Grub error after following these steps, it may be time to seek help from a professional. A technician with experience in troubleshooting Grub bootloader issues can help diagnose the problem and provide a solution tailored to your specific needs.

Conclusion

Encountering the Grub error "No Such Partition. Entering Rescue Mode. Grub Rescue" can be a frustrating experience, but with the right approach, it can be resolved. By following the steps outlined above and seeking help when needed, you can get your system up and running again in no time. With a little patience and persistence, you can overcome this error and get back to using your computer as usual.

Understanding the Grub Error: No Such Partition

When you encounter the Grub error “No Such Partition,” it means that the bootloader cannot find the specified partition to boot from. This error can occur due to a variety of reasons, such as an incorrect partition configuration, a faulty hard drive, or a corrupted filesystem. To resolve this issue, you may need to access the Grub rescue mode, which allows you to manually specify the correct partition to boot from.

Fixing the Grub Error: No Such Partition in Rescue Mode

To fix the Grub error in rescue mode, you will first need to identify the correct partition to boot from. You can do this by using the ‘ls’ command to list all available partitions and then manually selecting the correct partition using the ‘set’ command. Once you have set the correct partition, you can use the ‘boot’ command to boot into the selected partition. If you are still unable to fix the issue, you may need to reinstall the Grub bootloader or repair your filesystem using a live CD or USB.

Conclusion

In conclusion, encountering the Grub error “No Such Partition” can be frustrating, but with the right steps and troubleshooting methods, you can successfully fix the issue. By understanding the root cause of the error and using the Grub rescue mode effectively, you can resolve the problem and get your system up and running smoothly.

Source: Youtube Video https://www.youtube.com/watch?v=OJTGpvZO8Oc of Channel EasyTechs.

Introduction

[Music] Hi guys, this is Dude from Ascetics. In this tutorial, I’ll be showing you how to fix the problem of a missing boot device during Windows startup. First, I’ll be demonstrating this problem on a Lenovo E540 ThinkPad.

Checking for Loose Connections

The first thing you want to check when you encounter this problem is loose connections. Sometimes your laptop might experience shock or vibration that causes the hard disk to come loose from the connector. You can easily access your hard disk on laptops like the Lenovo E540 by opening the compartment under the laptop, cleaning the connectors, and reattaching the disk firmly. This could solve the issue and allow your laptop to boot back into Windows.

Checking BIOS Boot Priority

If checking for loose connections doesn’t solve the problem, the next step is to check your BIOS for boot priority order. Make sure your hard disk is included and placed correctly in the order of priority. Access your BIOS by pressing the designated key during startup (e.g. F1 for Lenovo E540) and navigate to the boot order settings. Ensure that your Windows disk is at the top of the priority order and save changes.

Possible Issues with Cable Connectors

Another possibility for the missing boot device error could be bad cable connectors connecting the disk to the motherboard. To check if this is the case, you can connect another test hard disk to the connector and see if it boots up. If it fails, you may have a broken cable that needs to be replaced.

Conclusion

If none of these solutions work, there may be a more technical issue with tracing the path to your Windows operating system by the BIOS. Consider seeking further assistance or watching a separate video on how to fix this specific problem. Remember to subscribe for more tech support videos like this one. Thanks for watching! [Music]

Troubleshooting Media Test Failure, Check Cable, No Bootable Device, and Boot Device Not Found Issues

Introduction

Are you facing media test failure, check cable, no bootable device, or boot device not found issues on your computer? Don’t panic! In this article, we will walk you through some troubleshooting steps to help you resolve these common problems.

Media Test Failure

Media test failure is a common issue that occurs when your computer is unable to detect the Ethernet cable or network during the boot process. This can be caused by a faulty network cable, a misconfigured network adapter, or a problem with the network settings on your computer.

To fix media test failure, try the following solutions:

1. Check the network cable: Make sure the Ethernet cable is securely connected to both your computer and the network device. If the cable is damaged or faulty, replace it with a new one.

2. Restart your computer: Sometimes, a simple restart can fix the issue. Restart your computer and check if the media test failure problem is resolved.

3. Update network drivers: Outdated network drivers can also cause media test failure issues. Update the network drivers on your computer to the latest version from the manufacturer’s website.

Check Cable

If you are seeing a "check cable" error message on your computer, it means that there is a problem with the network cable connection. The steps to fix this issue are similar to those for media test failure:

1. Check the network cable: Ensure that the Ethernet cable is connected properly and not damaged. Replace the cable if necessary.

2. Restart your computer: Try restarting your computer to see if the "check cable" error message disappears.

3. Update network drivers: Updating the network drivers on your computer can also help resolve the cable-related issues.

No Bootable Device

When your computer displays a "no bootable device" message, it means that the system is unable to find a bootable operating system on the selected drive. This can happen due to a corrupted operating system, a faulty hard drive, or incorrect boot settings.

To troubleshoot a no bootable device issue, consider the following:

1. Check boot device order: Ensure that the correct boot device is selected in the BIOS settings. You can access the BIOS by pressing a specific key during the startup process (usually F2, F10, or Del).

2. Repair the operating system: If the operating system is corrupted, you can try repairing it using the Windows Recovery Environment or a bootable USB drive.

3. Test the hard drive: Use a disk diagnostic tool to check the health of your hard drive. If the hard drive is faulty, you may need to replace it.

Boot Device Not Found

A "boot device not found" error message indicates that the computer cannot find the selected boot device to load the operating system. This can be due to a disconnected hard drive, corrupt boot files, or a misconfigured BIOS setting.

To fix the boot device not found problem, try the following solutions:

1. Check hard drive connections: Ensure that the hard drive is properly connected to the motherboard. If it’s a laptop, you may need to open the casing to check the connections.

2. Rebuild master boot record: You can use the Windows Recovery Environment to rebuild the master boot record (MBR) or GUID Partition Table (GPT) to fix the boot device not found error.

3. Reset BIOS settings: Resetting the BIOS to default settings can help resolve boot device issues caused by misconfiguration.

Conclusion

By following the troubleshooting steps outlined in this article, you should be able to fix media test failure, check cable, no bootable device, and boot device not found issues on your computer. If the problems persist, it may be best to consult a professional technician for further assistance.

How to Fix Media Test Failure

If you are experiencing a media test failure message on your computer, the issue may be due to a faulty network cable or network card. To fix this, first, check the network cable connection to ensure it is securely plugged in. If the connection looks fine, try replacing the network cable with a new one to see if that resolves the issue. Additionally, you can update the network card drivers by going to the Device Manager and selecting the network card to update the drivers.

No Bootable Device, Boot Device Not Found

If your computer is showing a “No Bootable Device” or “Boot Device Not Found” error message, it could indicate a problem with the hard drive or boot settings. First, check if the hard drive is properly connected by opening the computer case and ensuring all cables are securely connected. Next, access the BIOS settings by restarting the computer and pressing the designated key (usually F2 or Del). In the BIOS settings, check the boot order and make sure the hard drive is listed as the first boot device. Save the changes and restart the computer to see if the issue is resolved.

Conclusion: How to Fix Media Test Failure, Check cable, No Bootable Device, Boot Device Not Found

In conclusion, encountering errors like media test failure, no bootable device, or boot device not found can be frustrating, but with the right troubleshooting steps, you can resolve these issues. By checking cable connections, updating drivers, and adjusting boot settings, you can effectively fix these common computer problems. Remember to always back up your important data before attempting any fixes to avoid potential data loss.
Source: Youtube Video https://www.youtube.com/watch?v=owOxLwl12B8 of Channel EasyTechs.